Search

Rapid Heating Chamber Furnace - RWF

Request a quote
Create PDF

Language:

The RWF rapid wire chamber furnaces are available in three chamber sizes with maximum operating temperatures of 1100 °C or 1200 °C. The free radiating wire elements in combination with low thermal mass insulation are designed to provide rapid thermal response within the chamber.

Standard features

  • 1100°C or 1200°C maximum operating temperature
  • 5, 13 or 23 litre chamber volumes
  • Ambient to 1000°C in as little as 10 minutes
  • Rapid thermal response from free radiating coiled wire elements
  • Low thermal mass insulation for high energy efficiency
  • Programmable EPC3016P1 controller
  • Vertical lift door keeps heated surface away from the user
  • Soft closing door protects the thermal insulation
  • Hard wearing hearth

Options (specify these at time of order)

  • A range of sophisticated digital controllers, multisegment programmers and data loggers with digital communication options is available - more information about controllers
  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)

Rapid Heating Chamber Furnace - RWF Technical Data

Max temp (°C) Heat-up time (mins) Max continuous operating temp (°C) Dimensions:
Internal H x W x D (mm)
Dimensions:
External H x W x D (mm)
Dimensions:
External with door open H x W x D (mm)
Volume (litres) Max power (W) Holding power (W) Thermocouple type Weight (kg)
RWF 11/5 1100 10 1000 130 x 160 x 250 595 x 375 x 495 810 x 375 x 540 5 2750 680 K 28
RWF 11/13 1100 11 1000 195 x 210 x 325 670 x 435 x 608 915 x 435 x 675 13 5000 1200 K 45
RWF 11/23 1100 13 1000 220 x 260 x 400 715 x 505 x 680 1000 x 505 x 765 23 9100 1800 K 65
RWF 12/5 1200 12 1100 130 x 160 x 250 595 x 375 x 495 810 x 375 x 540 5 2750 820 R 28
RWF 12/13 1200 13 1100 195 x 210 x 325 670 x 435 x 608 915 x 435 x 675 13 5000 1450 R 45
RWF 12/23 1200 15 1100 220 x 260 x 400 715 x 505 x 680 1000 x 505 x 765 23 9100 2100 R 65

Please note
- Heat up rate is measured to 100°C below max, using an empty chamber
- Holding power is measured at continuous operating temperature
- Maximum power and heat up times based on a 240V supply
- The uniform volume is smaller than the total chamber volume

Content may be subject to modifications or corrections

Content may be subject to modifications or corrections