Search

Ash Fusibility Test Furnace - CAF G5

Ash Fusibility Test Furnace - CAF G5
CAF G5

CAF G5

Temperature range Up to 1600 °C (1600 °C required for some biomass samples)
Temperature Precision ± 3 °C above 800 °C
Temperature Ramp Rate 7 °C per minute
Temperature control Digital multiple PID terms with gain scheduling and multi offset parameters
Temperature Display °C
Work Tube dimensions 79 mm internal diameter
Tube material Mullite
Heating Elements Silicon carbide x 6
Maximum Sample Load, Manual Analysis 8
Maximum Sample Load, Automatic Analysis 6
Conforms to Standards BS ISO 540:2008; ASTM D 1857 / D1857M -18); DIN 51730:2007-09;BS EN ISO 21404:2020; PD CEN/TR 15404:2010
Ash Fusibility Determination Automatic or Manual (Coal & coke: DT, ST, H, FT) Manual only (Biomass / SRF: IST, DT, HT, FT)
Analysis time 3 runs per working day (including cool down times)
Image Collection Digital - up to 1 frame per 1 °C rise in temperature
Image Resolution 1280 x 1024 pixels
Gas Requirements: Purge N2 or CO2
Gas Requirements: Oxidising CO2 or Air
Gas Requirements: Reducing CO + CO2 or H2 + CO2
Ventilation Forced air ventilation
Exhaust Pipe to be vented into a separate fume hood
Safety Fail safe gas system and CO alarm supplied
Physical Dimensions (mm) 790 (h) x 505 (w) x 765 (case depth) x 970 (overall depth)
Weight (kg) (furnace) 84
Power supply 380 - 415 V, 50/60 Hz two phase 25 A/phase or
220 - 240 V, 50/60 Hz single phase 50 A
Power switching Solid state relays
Maximum power consumption (kW) 7
Environment Conditions - Operating Conditions 5 °C - 40 °C
Environment Conditions - Relative Humidity maximum 80 % up to 31 °C decreasing linearly to 50 % at 40 °C
Overtemperature protection Digital with single high alarm relay

Content may be subject to modifications or corrections